Samsung Dryers

Samsung DVE53BB8700VA

Model # DVE53BB8700VA

Described on samsung.com as Bespoke AI Front Load Electric Dryer Super Speed Dry AI Smart Dial | 7.6 cu.ft., the DVE53BB8700VA is a 7.6 cu. ft. electric dryer. An electric dryer like the DVE53BB8700VA needs both legs of its 240-volt supply to heat, and a drum that turns with cold air is checked at the outlet and breaker before the heating element or its thermostats are suspected.

Samsung built a vent test into the DVE53BB8700VA whose results – Clg, C80, C90 – read like codes but are measurements of how blocked the duct is, and we run it before and after clearing the duct so the fix is confirmed, not assumed.

Key Features

  • 7.6 cu. ft. drum capacity
  • Electric dryer
  • AI Smart Dial control
  • Super Speed Dry cycle
  • SmartThings Wi-Fi connection with cycle notifications
  • Bespoke finish and control layout

Most Common Issues on This Model

01

Load still damp after a full sensor cycle

02

Igniter glowing without a flame

03

tS, tE or tC temperature sensor code

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DVE53BB8700VA FAQ

No. dn means a firmware download to the DVE53BB8700VA is in progress, and Samsung’s guidance is to leave it powered until it restarts itself, which takes a few minutes. Cutting power to the DVE53BB8700VA mid-download is the one thing that can turn a routine update into a control problem.

On the DVE53BB8700VA, HC, hE and HC4 are Samsung’s heating codes, and the usual cause is a clogged lint screen or exhaust rather than a failed part. With the DVE53BB8700VA unplugged and cool, clean the screen and check the vent first; if the code returns with a clear vent, the thermistor, the high-limit thermostat and the element or gas valve are what gets tested.

Need a repair? We're ready to help. Call Now
Call Us Schedule