Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Washers Repair

Washers Repair, Done Right the First Time

Samsung sells top-load washers under the WA prefix and front-load washers under WF, plus a 24-inch compact front-load line, and its US support article lists every code for both types on one page - which is exactly why the first question on any Samsung washer call is which spelling of the code is on the display, because 4E and 4C are the same problem written by two generations of control.

Call (844) 702-1398 Schedule a Visit

Book Washers Repair

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

Samsung’s US washer lineup runs on two platforms that share one code vocabulary: front-load machines under the WF and WW prefixes and top-load machines under WA. Samsung lists their codes together on one support page, in pairs – 4E and 4C for fill, 5E and 5C for drain, OE and OC for overfill, dE and dC for the door, tE and tC for the thermistor, HE and HC for the heater, AE and AC for communication – where the E spelling belongs to older controls and the C spelling to newer ones. Reading the exact string matters more than the letter: 1E and 1C are the leak sensor on a washer, while LE on the same display family means something else on a dishwasher in the same kitchen.

The problems that bring a Samsung washer in sort into fill, drain, door and balance, and each group has a short list of parts behind it: the inlet valve and pressure sensor; the drain pump and its filter; the door lock and its switch; the suspension rods or dampers and the drum bearings. Vibration on a top-load model is checked against the leveling feet and the suspension before anything electrical is suspected.

With the breaker off and the taps closed, panels come off and the part a code names is measured rather than replaced on the strength of the code alone. Codes Samsung itself classes as notices rather than problems – SUd, CL child lock, dn during a firmware download, Cb during calibration, AP during app setup – are explained rather than repaired.

Common Washers Problems

01

4C or 4E on the display with the supply taps open and the drum dry

02

5C, 5E or nd shown and the drum still full at the end of the cycle

03

dC or dE shown and the door or lid refusing to lock, or refusing to release

04

UE, Ub or dc unbalance stops with the load left soaking wet

05

Machine pausing mid-cycle with SUd or Sd on the display

06

Top-load machine banging or walking during the spin

Washers Error Codes

Recognize a code on your display? Look it up before you unplug anything or attempt a repair.

AC4 / AE4

Samsung Washer AC4 and AE4 Error Code (Wi-Fi Module Communication)

AC5 / AE5

Samsung Washer AC5 and AE5 Error Code (LCD Module Communication)

AC6 / AE6

Samsung Washer AC6 and AE6 Error Code (Inverter PBA Communication)

dC1 / dE1

Samsung Washer dC1 and dE1 Error Code (Door Lock)

PC / PE

Samsung Washer PC and PE Error Code (Clutch)

8E / 8C / BE / BC

Samsung Washer 8E, 8C, BE and BC Error Code (Vibration Sensor)

bE / 6E

Samsung Washer bE and 6E Error Code (Motor Speed Sensor)

SF / 5F / Sr

Samsung Washer SF, 5F and Sr Error Code (System)

7E

Samsung Washer 7E Error Code (SilverCare)

AC / AE

Samsung Washer AC and AE Error Code (Communication)

tE / tC

Samsung Washer tE and tC Error Code

HC / HE / Hr

Samsung Washer HC, HE and Hr Error Code

See all Error Codes →

Popular Samsung Washers Models

Samsung WW25B6900A

Model # WW25B6900A

Samsung WA400PJHDW

Model # WA400PJHDW

Samsung WA40J3000A

Model # WA40J3000A

Samsung WA456DRHDS

Model # WA456DRHDS

Samsung WA52M7750AV

Model # WA52M7750AV

Samsung WA50K8600A

Model # WA50K8600A

Why Trust Us With Your Samsung Washers

  • Trained on Samsung washers control systems and diagnostics.
  • Genuine OEM parts stocked for the most common failures.
  • Upfront flat-rate pricing, approved by you before we start.
  • 30-day workmanship warranty on every repair. Parts may carry the manufacturer's warranty where applicable.
FAQ

Washers Repair FAQ

Samsung’s own US article groups 4C with 4E and nF as one problem: water is not entering the washer as expected. Before assuming a valve has failed, close both supply taps, then pull the machine forward enough to reach the hoses and check that neither is kinked, that the inlet screens inside the hose ends are clear, and that the taps were actually open. If the fill is still slow with clean screens and open taps, the inlet valve or the pressure sensor that measures the fill needs testing.

No. SUd, Sd or SUdS is Samsung’s over-sudsing notice: the washer has detected too much foam and pauses to let it dissipate, then continues on its own. Samsung states on its support page that this code does not mean service is needed. The usual cause is too much detergent, or a detergent that is not a high-efficiency formula, and the fix is simply to use less next time.

With the machine switched off at the breaker and both supply taps closed, place a shallow pan and towels below the small access door at the bottom front of a front-load model, then open the drain hose plug inside it slowly to let the water out before the pump filter is turned. The drum will not unlock until the water is out and the door lock has cooled, and forcing the handle only breaks the latch. A top-load lid that stays locked is released the same way once the tub has drained.

Need a repair? We're ready to help. Call Now
Call Us Schedule