Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Ranges Repair

Ranges Repair, Done Right the First Time

Samsung’s US ranges are mostly slide-in, sold in gas, electric, induction and a small number of dual-fuel versions, with Flex Duo divided ovens and Air Fry modes across much of the line, and they report problems with C-numbered codes and a few short words - door, bAd LinE, tESt - that Samsung documents on a single support page shared with its wall ovens.

Call (844) 702-1398 Schedule a Visit

Book Ranges Repair

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

A Samsung range shares one control board between its cooktop and its oven, so a single problem can appear in both places at once, and the cooktop side changes completely with the fuel: gas burners with valves, igniters and a spark module; radiant elements with their switches; or induction coils driven by power boards that must detect a suitable pan before they will heat. The oven side is more consistent across fuels – bake and broil elements or a gas bake igniter and valve, a temperature sensor, a convection fan, a door lock for self-clean and, on Flex Duo models, a removable partition with a switch that tells the control which mode is possible.

Samsung’s range codes are C-numbered – C-10 for the temperature sensor, C-24 for an oven whose temperature is rising abnormally, C-F0 for a communication problem between boards – plus plain-word messages such as door and bAd LinE for a power connection that is not fully seated. The same C- numbering appears on Samsung microwaves with different meanings, so a range code is read from the range article and nowhere else. Samsung also notes that a C-10 shown during self-diagnosis can be ignored if the oven goes on to heat normally, which is worth knowing before booking a visit.

Gas-side work starts with the supply shut and confirmed shut; electric and induction work starts with the breaker off. We test the part a code points at rather than replacing it because the number matches a parts list, and we say plainly when an older freestanding range is closer to replacement than repair.

Common Ranges Problems

01

Oven not reaching temperature, or C-24 shown after the oven ran hotter than set

02

C-10 on the display after start-up with the oven otherwise heating normally

03

-dE- or -dC- on a Flex Duo model with the divider partition installed

04

Gas burner sparking without lighting, or the oven igniter glowing but no flame

05

Induction zone showing an underlined u and refusing to heat the pan

06

tESt on the display and neither the oven nor the cooktop producing heat

Ranges Error Codes

Recognize a code on your display? Look it up before you unplug anything or attempt a repair.

C-24

Samsung Range C-24 Error Code

C-F0

Samsung Range C-F0 Error Code

-dE- / -dC-

Samsung Range -dE- and -dC- (Flex Duo Partition) Error Code

door

Samsung Range door Error Code

u

Samsung Range Underlined u Error Code

tESt / tE5t

Samsung Range tESt and tE5t Display (Not an Error)

C to P

Samsung Range C to P Display (Not an Error)

bAd LinE

Samsung Range bAd LinE Display (Not an Error)

C-10

Samsung Range C-10 Display (Not an Error)

See all Error Codes →

Popular Samsung Ranges Models

Samsung NX60A6751SS

Model # NX60A6751SS

Samsung NE59J3420SW

Model # NE59J3420SW

Samsung NE59J7850WS

Model # NE59J7850WS

Samsung NE63F6510SR

Model # NE63F6510SR

Samsung NE63B8611SS

Model # NE63B8611SS

Samsung NX58R6631ST

Model # NX58R6631ST

Why Trust Us With Your Samsung Ranges

  • Trained on Samsung ranges control systems and diagnostics.
  • Genuine OEM parts stocked for the most common failures.
  • Upfront flat-rate pricing, approved by you before we start.
  • 30-day workmanship warranty on every repair. Parts may carry the manufacturer's warranty where applicable.
FAQ

Ranges Repair FAQ

Demonstration mode. Samsung shows tESt or tE5t on the display when the range has been put into the showroom setting that lights the controls without powering the heating elements, and it is turned on by a button combination that is easy to hit while cleaning the panel. The owner’s manual for your model lists the combination that turns it off; no repair is involved.

Do not switch any light or appliance on or off, do not light anything, open a window if one is right there, get everyone out of the house and call your gas utility or the emergency number from outside. Only after the gas company has confirmed the supply is safe should the range itself be examined, and at that point the burner valves, the oven safety valve and the connections behind the range are checked with the supply shut.

Probably not. On Samsung’s divided ovens -dE- or -dC- means the control cannot confirm the partition is seated properly for the mode that was selected. With the oven off and cool, remove the divider, check that nothing is sitting in its rails, and reseat it fully until it sits level and locks; then choose the single-oven or twin mode that matches whether the partition is in. If the code stays with the partition clearly seated, the sensing switch in the oven wall needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule