Samsung Microwaves

Samsung ME11F7510

Model # ME11F7510

Described on samsung.com as Slim Over-the-Range Microwave Fingerprint Resistant Wi-Fi | 1.1 cu.ft., the ME11F7510 is a 1.1 cu. ft. over-the-range microwave. Because the ME11F7510 hangs over a cooktop it does two jobs, and its parts list is longer than a countertop unit’s: a vent fan, a cooktop light, a grease filter and a heat sensor that starts the fan on its own sit alongside the magnetron, transformer, capacitor, diode and door switches.

Everything behind the cabinet of the ME11F7510 – the fuse, the door switches, the diode, the capacitor and the magnetron – is tested on site by a technician who discharges the high-voltage circuit first; owner checks stop at the outlet, the breaker, whether the door closes fully and whether the turntable is seated.

Key Features

  • 1.1 cu. ft. capacity
  • Over-the-range microwave
  • SmartThings Wi-Fi connection
  • Fingerprint-resistant finish

Most Common Issues on This Model

01

TE touch communication code

02

-SE- on the display with a dead keypad

03

Door not latching on the first push

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung ME11F7510 FAQ

No. On the ME11F7510, Samsung puts C-20, C-21 and C-22 in the temperature-sensor group and C-10 to C-12 in the gas-sensor group, while the range article uses C-10 for the oven sensor and C-24 for an overheating cavity. The numbering overlaps; the meanings do not.

Not necessarily. Samsung lists -SE- as a key short - the control reading a key as pressed continuously - and on an over-the-range unit like the ME11F7510 the usual cause is steam or grease from the cooktop reaching the membrane behind the keypad. Switch the microwave off at the breaker for at least a minute and give a damp panel time to dry; if -SE- returns with the panel dry, the keypad or control board needs replacing.

Need a repair? We're ready to help. Call Now
Call Us Schedule