Samsung NK30R5000 Repair & Common Issues

Described on samsung.com as Chimney Hood 30″ LED Lights | 3 Speed Ventilation, the NK30R5000 is a 30-inch wall-mount chimney hood. Weak draw on the NK30R5000 is nearly always filters, a damper stuck shut or grease on the blower wheel rather than the motor, and each of those is checked before anything electrical.

We test the motor and its control on the NK30R5000, check the duct and damper for obstructions and look at the light circuit before concluding anything needs replacing; grease built up in the filters or duct is flagged on its own account, since it sits directly above a heat source.

Key Features

30-inch wall-mount chimney hood
LED cooktop lighting
Chimney-style canopy
Also sold as NK30R5000WS - the same platform in fingerprint resistant black stainless steel, stainless steel

Most Common Issues on This Model

01

Damper flap stuck shut

02

Fan stuck on one speed

03

Touch panel not responding

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details

2Date & Time

3Contact Info

or call (844) 702-1398 now

FAQ

Samsung NK30R5000 FAQ

If the NK30R5000 uses replaceable bulbs, yes: with the hood off and the light cool, fit the exact type the manual lists. If the NK30R5000 instead uses sealed LED modules, as many recent Samsung hoods do, those are replaced as a unit by a technician. If a correct bulb still does not light, the switch or the light circuit on the control board is the likelier problem.

With the NK30R5000 switched off and cool, take out the grease filters and wash them as the manual describes, then look up into the housing for grease on the blower wheel. If the NK30R5000 is ducted, check that the outside cap or damper is not stuck shut; if it recirculates, check the charcoal filter has been changed. Weak airflow with clean filters and a clear duct means the motor or its capacitor needs testing.