Samsung Dryers

Samsung DVG47CG3500VA

Model # DVG47CG3500VA

Samsung’s page for the DVG47CG3500VA reads Top Load Gas Dryer Wi-Fi & SmartThings Sensor Dry | 7.4 cu.ft.: a 7.4 cu. ft. gas dryer. The DVG47CG3500VA heats with a gas burner behind the lower front panel, and a flame that lights and then cuts out early is usually the gas valve coils weakening with heat – a failure that is measured, not guessed, once the supply is shut at the appliance valve.

Samsung built a vent test into the DVG47CG3500VA whose results – Clg, C80, C90 – read like codes but are measurements of how blocked the duct is, and we run it before and after clearing the duct so the fix is confirmed, not assumed.

Key Features

  • 7.4 cu. ft. drum capacity
  • Gas dryer
  • Sensor Dry moisture sensing
  • SmartThings Wi-Fi connection with cycle notifications

Most Common Issues on This Model

01

Igniter glowing without a flame

02

Gas burner lighting and cutting out early

03

Drum turning with no heat

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DVG47CG3500VA FAQ

On the DVG47CG3500VA, HC, hE and HC4 are Samsung’s heating codes, and the usual cause is a clogged lint screen or exhaust rather than a failed part. With the DVG47CG3500VA unplugged and cool, clean the screen and check the vent first; if the code returns with a clear vent, the thermistor, the high-limit thermostat and the element or gas valve are what gets tested.

Treat it as a measurement on the DVG47CG3500VA: Samsung describes C80 as roughly eight-tenths blocked and C90 as more than nine-tenths. With the DVG47CG3500VA switched off and cool, clear the lint screen and its housing, then disconnect the transition hose behind the dryer and check the duct run and the outside hood for packed lint or a flap that will not open. Run the test again once the duct is clear.

Need a repair? We're ready to help. Call Now
Call Us Schedule