Samsung Dishwashers

Samsung DW80CG5450MT

Model # DW80CG5450MT

The DW80CG5450MT is a 24-inch built-in dishwasher that Samsung lists as Bespoke Dishwasher with StormWash™ AutoRelease™ Door | Wi-Fi 46dBA. Poor cleaning on the DW80CG5450MT is worked through in order – filter, spray arms, water temperature at the machine, detergent and rinse aid – before the circulation pump is suspected, because most gritty-glass complaints resolve well before that.

On the DW80CG5450MT the door latch, the drain pump, the heater and the leak sensor account for most visits, and each is tested with the breaker off and the water shut before it is replaced.

Key Features

  • 24-inch built-in dishwasher
  • StormWash rotating spray jets for heavily soiled items
  • AutoRelease door that opens at the end of the cycle for drying
  • SmartThings Wi-Fi connection with cycle alerts
  • Bespoke panel design
  • 46 dBA rated sound level

Most Common Issues on This Model

01

Door latch not registering as closed

02

3C pump code partway through a wash

03

Cycle stalling at the drying stage

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DW80CG5450MT FAQ

Rarely as a first cause. With the DW80CG5450MT switched off and cool, clean the filter, pull the upper spray arm and clear its holes, and check that the hot water at the nearest faucet is actually hot before the cycle starts. If the top rack is still gritty after that, the circulation pump and the upper-arm feed are what a technician tests.

LC or LE is the leak-sensor code: moisture has reached the sensor in the base of the DW80CG5450MT. With the breaker off and the supply valve closed, look for water on the floor beneath the DW80CG5450MT and at the toe-kick. If the base is dry and the code returns once it has dried out, the sensor and its connections need testing rather than a hose.

Need a repair? We're ready to help. Call Now
Call Us Schedule