Samsung Washers

Samsung WA44A3205A

Model # WA44A3205A

Samsung’s page for the WA44A3205A reads Top Load Washer ActiveWave™ Agitator Vibration Reduction | 4.4 cu.ft., which places it in the 4.4 cu. ft. top-load washer line. Top-load Samsung washers such as the WA44A3205A hang the tub on four suspension rods, and a machine that walks or bangs in spin is checked at those rods and the leveling feet before the motor or the control is suspected.

With the WA44A3205A switched off at the breaker and both supply taps closed, panels come off and the part a code names – inlet valve, pressure sensor, pump, door lock, suspension – is measured rather than replaced on the strength of the code alone.

Key Features

  • 4.4 cu. ft. drum capacity
  • Top-load washer
  • Agitator wash action
  • Vibration reduction

Most Common Issues on This Model

01

UE or Ub unbalance stops leaving the load wet

02

tC or tE thermistor code at the start of a cycle

03

Loud spin noise pointing at bearings or suspension

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WA44A3205A FAQ

With the WA44A3205A switched off at the breaker and both taps closed, put a shallow pan and towels below the small access door at the bottom front, then open the drain hose plug inside it slowly and let the water out before turning the pump filter. The WA44A3205A’s door releases only once the drum is empty and the lock has cooled; forcing the handle breaks the latch.

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WA44A3205A. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule