Samsung Washers

Samsung WA54CG7105AVU

Model # WA54CG7105AVU

Samsung’s page for the WA54CG7105AVU reads Top Load Washer ActiveWave™ Agitator Super Speed Wash | 5.4 cu. ft, which places it in the 5.4 cu. ft. top-load washer line. Top-load Samsung washers such as the WA54CG7105AVU hang the tub on four suspension rods, and a machine that walks or bangs in spin is checked at those rods and the leveling feet before the motor or the control is suspected.

Codes Samsung itself classes as notices rather than failures – SUd for suds, CL for child lock, dn during a firmware download – are explained on the WA54CG7105AVU and not repaired; the rest are tested with the breaker off and the water shut before any panel is opened.

Key Features

  • 5.4 cu. ft. drum capacity
  • Top-load washer
  • Super Speed Wash cycle
  • Agitator wash action

Most Common Issues on This Model

01

HC or HE heater code on a warm-wash cycle

02

UE or Ub unbalance stops leaving the load wet

03

Loud spin noise pointing at bearings or suspension

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WA54CG7105AVU FAQ

No. SUd, Sd or SUdS is Samsung’s over-sudsing notice: the WA54CG7105AVU has detected too much foam and waits for it to settle, then continues on its own. Samsung’s support page says this code needs no service. Use less detergent, and a high-efficiency formula, next time.

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WA54CG7105AVU. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule