Samsung Dryers

Samsung DVG45T3200

Model # DVG45T3200

Described on samsung.com as Top Load Gas Dryer Sensor Dry Reversible Dryer Door | 7.2 cu.ft., the DVG45T3200 is a 7.2 cu. ft. gas dryer. The DVG45T3200 heats with a gas burner behind the lower front panel, and a flame that lights and then cuts out early is usually the gas valve coils weakening with heat – a failure that is measured, not guessed, once the supply is shut at the appliance valve.

With the circuit to the DVG45T3200 isolated and the drum cool, the exhaust path is checked before any electrical part is measured, because restricted airflow gives the same complaint as a failed part; only then do the thermistor, thermostats, element or burner, motor, belt and rollers get tested in the order the sign suggests.

Key Features

  • 7.2 cu. ft. drum capacity
  • Gas dryer
  • Sensor Dry moisture sensing

Most Common Issues on This Model

01

AC or AE communication code between boards

02

tS, tE or tC temperature sensor code

03

9C1 or 9E voltage code at start-up

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DVG45T3200 FAQ

Treat it as a measurement on the DVG45T3200: Samsung describes C80 as roughly eight-tenths blocked and C90 as more than nine-tenths. With the DVG45T3200 switched off and cool, clear the lint screen and its housing, then disconnect the transition hose behind the dryer and check the duct run and the outside hood for packed lint or a flap that will not open. Run the test again once the duct is clear.

On the DVG45T3200, HC, hE and HC4 are Samsung’s heating codes, and the usual cause is a clogged lint screen or exhaust rather than a failed part. With the DVG45T3200 unplugged and cool, clean the screen and check the vent first; if the code returns with a clear vent, the thermistor, the high-limit thermostat and the element or gas valve are what gets tested.

Need a repair? We're ready to help. Call Now
Call Us Schedule