Samsung Dishwashers

Samsung DW50T6060

Model # DW50T6060

The DW50T6060 is a 24-inch built-in dishwasher that Samsung lists as 18″ Dishwasher Fingerprint Resistant | AutoRelease™ Door 46dBA. On the DW50T6060, Samsung reuses letters from its washer line with dishwasher meanings: 5C or SC is drain, 4C is low supply pressure or temperature, LC is the leak sensor in the base, 3C the circulation pump and 9E a low water level.

With the breaker off and the supply valve under the sink closed, the toe-kick and outer door panel of the DW50T6060 come off and the part a code names is measured rather than swapped; AP on the display, which means app-pairing mode, is explained and not treated as a problem.

Key Features

  • 24-inch built-in dishwasher
  • AutoRelease door that opens at the end of the cycle for drying
  • Fingerprint-resistant finish
  • 46 dBA rated sound level

Most Common Issues on This Model

01

9E water-level code after a slow fill

02

LC or LE leak-sensor code at start

03

Lights blinking on a model without a display

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DW50T6060 FAQ

Once the DW50T6060 is switched off at the breaker and the water inside has cooled, lift out the filter assembly at the bottom of the tub the way the manual shows, rinse it and look into the sump beneath for food or glass. Check that the drain hose under the sink is not kinked and that the disposer knockout was removed if the hose connects there. If water still stands with a clean filter and a clear hose, the drain pump or the sump check valve needs testing.

The same family - water supply - but different wording and different parts. On the DW50T6060 4C or 4E points at water pressure or temperature too low for the cycle, so the first checks are the supply valve under the sink and the hot-water temperature reaching the machine, not the dishwasher’s own valve.

Need a repair? We're ready to help. Call Now
Call Us Schedule