Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Dishwashers

Samsung DW80CG4051SR

Model # DW80CG4051SR

Call (844) 702-1398 Schedule a Visit

Listed by Samsung as Dishwasher with 3rd Rack AutoRelease™ Door | Fingerprint Resistant 51dBA, the DW80CG4051SR is one of its 24-inch built-in dishwashers. A DW80CG4051SR that leaves water in the tub is traced from the filter to the pump to the drain hose, and a leak-sensor code on it is confirmed as a real leak or a false one – a spill that reached the base, or condensation – before anything is ordered.

We check hot-water temperature at the DW80CG4051SR on every poor-cleaning call, because a 4C or a filmy load on this model is often the supply and not the dishwasher.

Key Features

  • 24-inch built-in dishwasher
  • AutoRelease door that opens at the end of the cycle for drying
  • Third rack for utensils and small items
  • Fingerprint-resistant finish
  • 51 dBA rated sound level

Most Common Issues on This Model

01

Door latch not registering as closed

02

Dishes gritty or filmy on the upper rack

03

HC over-temperature code or HE sensor code

Error Codes Common to This Model

dC3

Samsung Dishwasher dC3 Error Code

PE

Samsung Dishwasher PE Error Code

tE

Samsung Dishwasher tE Error Code

AC / AC6

Samsung Dishwasher AC and AC6 Error Code

FC

Samsung Dishwasher FC Error Code

4C / 4E

Samsung Dishwasher 4C and 4E Error Code

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DW80CG4051SR FAQ

Once the DW80CG4051SR is switched off at the breaker and the water inside has cooled, lift out the filter assembly at the bottom of the tub the way the manual shows, rinse it and look into the sump beneath for food or glass. Check that the drain hose under the sink is not kinked and that the disposer knockout was removed if the hose connects there. If water still stands with a clean filter and a clear hose, the drain pump or the sump check valve needs testing.

Rarely as a first cause. With the DW80CG4051SR switched off and cool, clean the filter, pull the upper spray arm and clear its holes, and check that the hot water at the nearest faucet is actually hot before the cycle starts. If the top rack is still gritty after that, the circulation pump and the upper-arm feed are what a technician tests.

Need a repair? We're ready to help. Call Now
Call Us Schedule