Samsung DW80CG5451SR Repair & Common Issues

Samsung’s page for the DW80CG5451SR reads Bespoke Dishwasher with StormWash™ AutoRelease™ Door | Wi-Fi 46dBA; like every dishwasher Samsung sells in the US it is a 24-inch built-in. On the DW80CG5451SR, Samsung reuses letters from its washer line with dishwasher meanings: 5C or SC is drain, 4C is low supply pressure or temperature, LC is the leak sensor in the base, 3C the circulation pump and 9E a low water level.

With the breaker off and the supply valve under the sink closed, the toe-kick and outer door panel of the DW80CG5451SR come off and the part a code names is measured rather than swapped; AP on the display, which means app-pairing mode, is explained and not treated as a problem.

Key Features

24-inch built-in dishwasher
StormWash rotating spray jets for heavily soiled items
AutoRelease door that opens at the end of the cycle for drying
SmartThings Wi-Fi connection with cycle alerts
Bespoke panel design
46 dBA rated sound level

Most Common Issues on This Model

01

5C, 5E, SC or SE with water left in the tub

02

3C pump code partway through a wash

03

4C or 4E supply code before the first fill

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details

2Date & Time

3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DW80CG5451SR FAQ

Once the DW80CG5451SR is switched off at the breaker and the water inside has cooled, lift out the filter assembly at the bottom of the tub the way the manual shows, rinse it and look into the sump beneath for food or glass. Check that the drain hose under the sink is not kinked and that the disposer knockout was removed if the hose connects there. If water still stands with a clean filter and a clear hose, the drain pump or the sump check valve needs testing.

LC or LE is the leak-sensor code: moisture has reached the sensor in the base of the DW80CG5451SR. With the breaker off and the supply valve closed, look for water on the floor beneath the DW80CG5451SR and at the toe-kick. If the base is dry and the code returns once it has dried out, the sensor and its connections need testing rather than a hose.

Samsung DW80CG5451SR