Samsung Dryers

Samsung DV25B6900H

Model # DV25B6900H

The DV25B6900H is a 4.0 cu. ft. heat-pump ventless dryer, listed by Samsung as Front Load Ventless Heat Pump Dryer Ventless Heat Pump AI Smart Dial | 4.0 cu.ft.. Because the DV25B6900H dries with a heat pump and no exhaust duct, a damp load at the end of a cycle points at a clogged condenser or lint path, a heat-pump sensor or a condensate drain that is backing up, not at a blocked wall vent.

With the circuit to the DV25B6900H isolated and the drum cool, the exhaust path is checked before any electrical part is measured, because restricted airflow gives the same complaint as a failed part; only then do the thermistor, thermostats, element or burner, motor, belt and rollers get tested in the order the sign suggests.

Key Features

  • 4.0 cu. ft. drum capacity
  • Heat-pump ventless dryer
  • Heat-pump ventless drying with no exhaust duct
  • Ventless condensing design with no exhaust duct
  • AI Smart Dial control
  • SmartThings Wi-Fi connection with cycle notifications

Most Common Issues on This Model

01

HC or hE heating code with the cabinet hot

02

9C1 or 9E voltage code at start-up

03

bE or bE2 stuck-button code

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DV25B6900H FAQ

Treat it as a measurement on the DV25B6900H: Samsung describes C80 as roughly eight-tenths blocked and C90 as more than nine-tenths. With the DV25B6900H switched off and cool, clear the lint screen and its housing, then disconnect the transition hose behind the dryer and check the duct run and the outside hood for packed lint or a flap that will not open. Run the test again once the duct is clear.

On the DV25B6900H, HC, hE and HC4 are Samsung’s heating codes, and the usual cause is a clogged lint screen or exhaust rather than a failed part. With the DV25B6900H unplugged and cool, clean the screen and check the vent first; if the code returns with a clear vent, the thermistor, the high-limit thermostat and the element or gas valve are what gets tested.

Need a repair? We're ready to help. Call Now
Call Us Schedule