Samsung Dryers

Samsung DV25FG60BVBEA

Model # DV25FG60BVBEA

The DV25FG60BVBEA is a 4.0 cu. ft. electric dryer, listed by Samsung as Compact Electric Dryer Wi-Fi Connectivity Sensor Dry | 4.0 cu.ft.. An electric dryer like the DV25FG60BVBEA needs both legs of its 240-volt supply to heat, and a drum that turns with cold air is checked at the outlet and breaker before the heating element or its thermostats are suspected.

On the DV25FG60BVBEA we treat dn as a firmware download in progress and CL as child lock, neither of which is a problem; the real codes – tS, tE, tC, dC, dE, 9C1, FC – are tested with the breaker off and the drum cool before anything is replaced.

Key Features

  • 4.0 cu. ft. drum capacity
  • Electric dryer
  • Sensor Dry moisture sensing
  • SmartThings Wi-Fi connection with cycle notifications
  • 24-inch compact cabinet

Most Common Issues on This Model

01

bE or bE2 stuck-button code

02

Drum turning with no heat

03

Gas burner lighting and cutting out early

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DV25FG60BVBEA FAQ

First the supply: an electric dryer heats on 240 volts and turns on 120, so a tripped half of a double breaker leaves the DV25FG60BVBEA tumbling cold. If the breaker is sound, the heating element, the high-limit thermostat and the thermistor are tested with the dryer unplugged and the rear panel off.

Treat it as a measurement on the DV25FG60BVBEA: Samsung describes C80 as roughly eight-tenths blocked and C90 as more than nine-tenths. With the DV25FG60BVBEA switched off and cool, clear the lint screen and its housing, then disconnect the transition hose behind the dryer and check the duct run and the outside hood for packed lint or a flap that will not open. Run the test again once the duct is clear.

Need a repair? We're ready to help. Call Now
Call Us Schedule