Samsung Dryers

Samsung DVG45B6300

Model # DVG45B6300

Samsung’s page for the DVG45B6300 reads Front Load Gas Dryer Steam Sanitize+ Sensor Dry | 7.5 cu.ft.: a 7.5 cu. ft. gas dryer. On a gas dryer like the DVG45B6300, the igniter glows, the flame sensor opens the gas valve coils and the burner lights; a drum that turns with no heat is traced through those three parts in that order, with the gas supply confirmed shut at the appliance valve before the burner housing is opened.

With the circuit to the DVG45B6300 isolated and the drum cool, the exhaust path is checked before any electrical part is measured, because restricted airflow gives the same complaint as a failed part; only then do the thermistor, thermostats, element or burner, motor, belt and rollers get tested in the order the sign suggests.

Key Features

  • 7.5 cu. ft. drum capacity
  • Gas dryer
  • Steam Sanitize+ cycle
  • Steam refresh cycle
  • Sensor Dry moisture sensing
  • Also sold as DVG45B6300W - the same platform in platinum, white

Most Common Issues on This Model

01

Clg, C80 or C90 vent-test result

02

bE or bE2 stuck-button code

03

AC or AE communication code between boards

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DVG45B6300 FAQ

No. dn means a firmware download to the DVG45B6300 is in progress, and Samsung’s guidance is to leave it powered until it restarts itself, which takes a few minutes. Cutting power to the DVG45B6300 mid-download is the one thing that can turn a routine update into a control problem.

On a gas dryer the sequence is igniter, flame sensor, gas valve coils. With the gas shut at the appliance valve and the dryer unplugged, the lower front panel comes off and each is tested in turn - the coils are the usual finding when the flame lights and dies early. Do not open the burner housing with the supply on.

Need a repair? We're ready to help. Call Now
Call Us Schedule