Samsung Dryers

Samsung DVG54CG7150DA

Model # DVG54CG7150DA

Described on samsung.com as Top Load Gas Dryer Pet Care Dry Steam Sanitize+ | 7.4 cu.ft., the DVG54CG7150DA is a 7.4 cu. ft. gas dryer. The DVG54CG7150DA heats with a gas burner behind the lower front panel, and a flame that lights and then cuts out early is usually the gas valve coils weakening with heat – a failure that is measured, not guessed, once the supply is shut at the appliance valve.

With the circuit to the DVG54CG7150DA isolated and the drum cool, the exhaust path is checked before any electrical part is measured, because restricted airflow gives the same complaint as a failed part; only then do the thermistor, thermostats, element or burner, motor, belt and rollers get tested in the order the sign suggests.

Key Features

  • 7.4 cu. ft. drum capacity
  • Gas dryer
  • Steam Sanitize+ cycle
  • Steam refresh cycle

Most Common Issues on This Model

01

Drum turning with no heat

02

dC or dE door code with the door latched

03

9C1 or 9E voltage code at start-up

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung DVG54CG7150DA FAQ

Treat it as a measurement on the DVG54CG7150DA: Samsung describes C80 as roughly eight-tenths blocked and C90 as more than nine-tenths. With the DVG54CG7150DA switched off and cool, clear the lint screen and its housing, then disconnect the transition hose behind the dryer and check the duct run and the outside hood for packed lint or a flap that will not open. Run the test again once the duct is clear.

On a gas dryer the sequence is igniter, flame sensor, gas valve coils. With the gas shut at the appliance valve and the dryer unplugged, the lower front panel comes off and each is tested in turn - the coils are the usual finding when the flame lights and dies early. Do not open the burner housing with the supply on.

Need a repair? We're ready to help. Call Now
Call Us Schedule