Samsung Washers

Samsung WA41A3000A

Model # WA41A3000A

Samsung’s page for the WA41A3000A reads Top Load Washer Vibration Reduction Extra High Water Level | 4.1 cu.ft., which places it in the 4.1 cu. ft. top-load washer line. Top-load Samsung washers such as the WA41A3000A hang the tub on four suspension rods, and a machine that walks or bangs in spin is checked at those rods and the leveling feet before the motor or the control is suspected.

Codes Samsung itself classes as notices rather than failures – SUd for suds, CL for child lock, dn during a firmware download – are explained on the WA41A3000A and not repaired; the rest are tested with the breaker off and the water shut before any panel is opened.

Key Features

  • 4.1 cu. ft. drum capacity
  • Top-load washer
  • Vibration reduction

Most Common Issues on This Model

01

UE or Ub unbalance stops leaving the load wet

02

PC or PE clutch code on the wash-to-spin change

03

LC, LE or 1C leak-sensor code

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WA41A3000A FAQ

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WA41A3000A. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Usually not on its own. With the WA41A3000A unplugged, check that all four feet sit firmly and the cabinet does not rock, and that the shipping bolts were removed at installation. A WA41A3000A that also roars as it speeds up points at the bearings; one that only walks with one heavy item points at the suspension or the load. We check the feet and suspension first because they are the cheaper fix.

Need a repair? We're ready to help. Call Now
Call Us Schedule