Samsung Washers

Samsung WA52DG5500AWU

Model # WA52DG5500AWU

Listed by Samsung as Top Load Washer Super Speed Wash Active WaterJet | 5.2 cu.ft., the WA52DG5500AWU is a 5.2 cu. ft. top-load washer. Top-load Samsung washers such as the WA52DG5500AWU hang the tub on four suspension rods, and a machine that walks or bangs in spin is checked at those rods and the leveling feet before the motor or the control is suspected.

Codes Samsung itself classes as notices rather than failures – SUd for suds, CL for child lock, dn during a firmware download – are explained on the WA52DG5500AWU and not repaired; the rest are tested with the breaker off and the water shut before any panel is opened.

Key Features

  • 5.2 cu. ft. drum capacity
  • Top-load washer
  • Super Speed Wash cycle
  • Active WaterJet faucet on the top for pretreating

Most Common Issues on This Model

01

SUd or Sd suds pause on most cycles

02

4C or 4E fill code with the taps open

03

LC, LE or 1C leak-sensor code

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WA52DG5500AWU FAQ

Usually not on its own. With the WA52DG5500AWU unplugged, check that all four feet sit firmly and the cabinet does not rock, and that the shipping bolts were removed at installation. A WA52DG5500AWU that also roars as it speeds up points at the bearings; one that only walks with one heavy item points at the suspension or the load. We check the feet and suspension first because they are the cheaper fix.

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WA52DG5500AWU. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule