Samsung Washers

Samsung WF50BG8300AEU

Model # WF50BG8300AEU

The WF50BG8300AEU is a 4.5 cu. ft. front-load washer; Samsung describes it as Front Load Washer Super Speed Wash Steam Wash | 4.5 cu.ft.. On the WF50BG8300AEU, a door that will not release with water in the drum is the most common urgent call, and it is a drain problem that shows as a door problem: the lock stays shut until the water is out.

With the WF50BG8300AEU switched off at the breaker and both supply taps closed, panels come off and the part a code names – inlet valve, pressure sensor, pump, door lock, suspension – is measured rather than replaced on the strength of the code alone.

Key Features

  • 4.5 cu. ft. drum capacity
  • Front-load washer
  • Super Speed Wash cycle
  • Steam wash option

Most Common Issues on This Model

01

HC or HE heater code on a warm-wash cycle

02

Loud spin noise pointing at bearings or suspension

03

4C or 4E fill code with the taps open

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WF50BG8300AEU FAQ

With the WF50BG8300AEU switched off at the breaker and both taps closed, put a shallow pan and towels below the small access door at the bottom front, then open the drain hose plug inside it slowly and let the water out before turning the pump filter. The WF50BG8300AEU’s door releases only once the drum is empty and the lock has cooled; forcing the handle breaks the latch.

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WF50BG8300AEU. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule