Samsung Washers

Samsung WW25FG6B34BEA

Model # WW25FG6B34BEA

Listed by Samsung as Compact Front Load Washer Wi-Fi Connectivity Super Speed Wash | 2.5 cu.ft., the WW25FG6B34BEA is a 2.5 cu. ft. front-load washer. Front-load Samsung washers such as the WW25FG6B34BEA put the drain pump and its filter behind a small door at the bottom front, and a 5C or 5E drain code on this model starts there once the drum has been emptied.

Codes Samsung itself classes as notices rather than failures – SUd for suds, CL for child lock, dn during a firmware download – are explained on the WW25FG6B34BEA and not repaired; the rest are tested with the breaker off and the water shut before any panel is opened.

Key Features

  • 2.5 cu. ft. drum capacity
  • Front-load washer
  • Super Speed Wash cycle
  • SmartThings Wi-Fi connection with cycle notifications
  • 24-inch compact cabinet for stacking or closets

Most Common Issues on This Model

01

5C, 5E or nd left with water in the drum

02

PC or PE clutch code on the wash-to-spin change

03

SUd or Sd suds pause on most cycles

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung WW25FG6B34BEA FAQ

With the WW25FG6B34BEA switched off at the breaker and both taps closed, put a shallow pan and towels below the small access door at the bottom front, then open the drain hose plug inside it slowly and let the water out before turning the pump filter. The WW25FG6B34BEA’s door releases only once the drum is empty and the lock has cooled; forcing the handle breaks the latch.

Not necessarily. Samsung groups 4C with 4E as water not entering as expected on the WW25FG6B34BEA. With both supply taps closed and it pulled forward enough to reach the hoses, check that neither hose is kinked and that the screens inside the hose ends are clear, then reopen the taps and try again. If the fill is still slow with clear screens and open taps, the inlet valve or the pressure sensor needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule