Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Ranges

Samsung FTQ353IW

Model # FTQ353IW

Call (844) 702-1398 Schedule a Visit

The FTQ353IW is a electric range, listed on samsung.com as electric convection range. The FTQ353IW reports oven problems as C-numbered codes – C-10 for the temperature sensor, C-24 for a cavity heating beyond its target, C-F0 for a communication failure between boards – and Samsung notes a C-10 during self-diagnosis can be ignored if the oven then heats normally.

Work on the FTQ353IW begins with the breaker off and the oven cool; the rear panel and the control housing come off and the sensor, elements and relays are measured before any part is ordered.

Key Features

  • Electric range
  • Convection fan baking

Most Common Issues on This Model

01

Convection fan noisy or silent

02

Oven slow to preheat or under temperature

03

C-24 after the oven ran hotter than set

Error Codes Common to This Model

C-24

Samsung Range C-24 Error Code

C-F0

Samsung Range C-F0 Error Code

-dE- / -dC-

Samsung Range -dE- and -dC- (Flex Duo Partition) Error Code

door

Samsung Range door Error Code

u

Samsung Range Underlined u Error Code

tESt / tE5t

Samsung Range tESt and tE5t Display (Not an Error)

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung FTQ353IW FAQ

With the breaker for the FTQ353IW off and the oven cool, the element is held by two screws at the back wall and two push-on wires, and many owners do change it. Before ordering a part for the FTQ353IW, though, confirm it has actually failed - a broken or blistered element is obvious, but an element that looks fine and stays cold is usually a relay board or sensor problem, and a new element will not fix that.

On the FTQ353IW, Samsung’s range article says a C-10 that appears during self-diagnosis can be ignored if the oven then heats normally. If it also runs cold or uneven, the oven temperature sensor is the part to test, with the breaker off and the rear panel removed.

Need a repair? We're ready to help. Call Now
Call Us Schedule