Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Ranges

Samsung NSE90H63DR

Model # NSE90H63DR

Call (844) 702-1398 Schedule a Visit

Samsung’s page for the NSE90H63DR reads Bespoke Smart Slide-in Electric Range Flex Duo™ Oven | Pro Style Design | Dual True Convection – a slide-in electric range. The Flex Duo divider on the NSE90H63DR has a switch in the oven wall that tells the control which mode is possible, and a -dE- or -dC- on this range means the partition is not seated for the mode selected – a reseat, not a repair, in most cases.

On the NSE90H63DR, tESt on the display means demonstration mode and is switched off by the button combination in the owner’s manual, and bAd LinE means the power connection is not fully seated; both are explained before a visit is booked.

Key Features

  • Slide-in electric range
  • Flex Duo removable divider that splits the oven into two cavities
  • True convection with a heated fan element
  • Convection fan baking
  • SmartThings Wi-Fi connection with remote preheat
  • Bespoke finish and trim

Most Common Issues on This Model

01

C-10 sensor code after start-up

02

Oven slow to preheat or under temperature

03

Display dark after a power interruption

Error Codes Common to This Model

C-F0

Samsung Range C-F0 Error Code

-dE- / -dC-

Samsung Range -dE- and -dC- (Flex Duo Partition) Error Code

door

Samsung Range door Error Code

u

Samsung Range Underlined u Error Code

tESt / tE5t

Samsung Range tESt and tE5t Display (Not an Error)

C to P

Samsung Range C to P Display (Not an Error)

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung NSE90H63DR FAQ

Probably not. On the NSE90H63DR, -dE- or -dC- means the control cannot confirm the Flex Duo partition is seated for the mode selected. With the oven off and cool, remove the divider, check that nothing sits in its rails, reseat it until it sits level and locks, then choose the mode that matches whether it is in. If the code stays with the partition clearly seated, the sensing switch in the oven wall needs testing.

Demonstration mode. Samsung shows tESt or tE5t when the NSE90H63DR has been put into the showroom setting that lights the controls without powering the heating parts, and it is switched on by a button combination that is easy to hit while cleaning the panel. The NSE90H63DR’s owner’s manual lists the combination to turn it off; no repair is involved.

Need a repair? We're ready to help. Call Now
Call Us Schedule