Samsung Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 702-1398
Appliance Support and Repair Samsung
☎ (844) 702-1398 Schedule a Visit
Samsung Ranges

Samsung NSY6DG8550SR

Model # NSY6DG8550SR

Call (844) 702-1398 Schedule a Visit

The NSY6DG8550SR is a 6.3 cu. ft. slide-in dual-fuel range, listed on samsung.com as Bespoke Slide-in Dual Fuel Range Flex Duo™ | Illuminated Precision Knobs 6.3 cu.ft.. The Flex Duo divider on the NSY6DG8550SR has a switch in the oven wall that tells the control which mode is possible, and a -dE- or -dC- on this range means the partition is not seated for the mode selected – a reseat, not a repair, in most cases.

On the NSY6DG8550SR, tESt on the display means demonstration mode and is switched off by the button combination in the owner’s manual, and bAd LinE means the power connection is not fully seated; both are explained before a visit is booked.

Key Features

  • 6.3 cu. ft. oven capacity
  • Slide-in dual-fuel range
  • Flex Duo removable divider that splits the oven into two cavities
  • Bespoke finish and trim

Most Common Issues on This Model

01

Display dark after a power interruption

02

Convection fan noisy or silent

03

Oven slow to preheat or under temperature

Error Codes Common to This Model

C-24

Samsung Range C-24 Error Code

C-F0

Samsung Range C-F0 Error Code

-dE- / -dC-

Samsung Range -dE- and -dC- (Flex Duo Partition) Error Code

door

Samsung Range door Error Code

u

Samsung Range Underlined u Error Code

tESt / tE5t

Samsung Range tESt and tE5t Display (Not an Error)

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 702-1398 Schedule a Visit

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

1Service Details
2Date & Time
3Contact Info

or call (844) 702-1398 now

FAQ

Samsung NSY6DG8550SR FAQ

Usually. The glow-bar igniter in the NSY6DG8550SR has to draw enough current to open the oven safety valve, and a weak one glows without ever letting gas through. It is measured, not guessed: with the gas shut at the appliance valve and the range unplugged, the oven floor comes out and the igniter current is read under load.

Probably not. On the NSY6DG8550SR, -dE- or -dC- means the control cannot confirm the Flex Duo partition is seated for the mode selected. With the oven off and cool, remove the divider, check that nothing sits in its rails, reseat it until it sits level and locks, then choose the mode that matches whether it is in. If the code stays with the partition clearly seated, the sensing switch in the oven wall needs testing.

Need a repair? We're ready to help. Call Now
Call Us Schedule